Contouring efficiencies with 5-axis

The MAG Modular H-Series machine is shown above as a single machine starter cell with an RGV pallet delivery system, four-pallet storage, and a roll-down load station.MAG's HyperMach H-Series now includes the H12000, allowing horizontal part loading on the 12m x 2m (39.4ft x 6.5ft) pallet for large-part machining. The models for aluminum machining offer an expanded choice of 30,000rpm with 60kW (80hp) or 100kW (134hp) HKS 63A motorized spindles, or 20,000rpm with an 85kW (115hp) HSK100A motorized spindle. The high-speed spindles deliver high metal removal rates of 8,066.5cc/min (500 in3/min) on aluminum plate or forgings. GTi titanium models in the H-Series offer a choice of two geared, high-torque HSK100A spindles delivering 850Nm or 1,050Nm torque at 6,000rpm or 4,800rpm.

All HyperMach H-Series machines feature a full portal, open center design. Cutting operations are totally enclosed with chip fall-through to a high-volume conveyor, avoiding chip recutting and the need for a chip blow-off attendant. Full-portal closed-loop construction maximizes stiffness and ensures consistent cutting performance at any position of the pallet and spindle, while eliminating thermal drift and periodic realignment between column and pallet table. The 12m model uses a traveling column, stationary pallet receiver. 

Water-cooled servomotors are utilized on all five axes of the H-Series machines to eliminate thermal influence of the motors and maximize performance for high feedrates.  The X-axis pallet receiver and the Y and Z axes are capable of speeds up to 50mpm (2,000ipm).

MAG Americas
Sterling Hts., MI
mag-ias.com