Executives of Spirit AeroSystems Inc. of Witchita, Kan., and Norsk Titanium Components AS, based in Honefoss, Norway, announce a significant milestone in a multi-year collaboration for direct metal deposition (DMD) technology. Together the companies have achieved technology readiness level six (TRL6), demonstrating the ability to meet aerospace material requirements. [This level means the system/subsystem model or prototype has been demonstrated in a relevant environment, according to Department of Defense guidelines for new technology.]
Norsk Titanium Components has developed a "near-net-shape" manufacturing technology that enables titanium components to be built up close to the final shape using titanium feedstock instead of a large titanium block. The process reduces waste, uses less energy and is significantly faster, say company officials.
"This is a significant achievement for the aerospace industry," says Bill Smith, Spirit AeroSystems director of technology development. "Titanium is an expensive and difficult material to manufacture. By having near-net-shape product forms, Spirit is able to reduce costs. Additionally, this direct from digital process can reduce the time to market for new parts by at least 60%."
The process transforms titanium feedstock into complex components that are up to 80% complete. Traditional titanium machining may utilize only 10% of the raw material with 90% of it discarded as waste. In addition to significantly reducing the amount of raw material used, the process provides much shorter lead times, design flexibility, and reduces the overall cost to machine parts, according to Smith.
"The aerospace industry is by far the largest and most demanding titanium segment in the world, and achieving TRL6 is a major milestone," says Jon Andre Lokke, CEO of Norsk Titanium Components. "We are very pleased with the cooperation and support we have from Spirit and we are now eager to complete the qualification process and start producing parts for the aerospace industry."
Both firms have worked closely to develop Norsk Titanium Components’ DMD process for producing Ti6Al4V material for use in commercial aerospace applications. The milestone confirms the capability of this material to meet the requirements for aircraft structural components.
The companies currently are working under a cooperative agreement to complete qualification of the process that will lead to widespread aerospace application. The qualification effort is expected to be complete in 2014 allowing structural designers to use the DMD process for new and existing airplane programs.