Boeing Demonstrates Unmanned Aircraft

The July 7-10 mission used two ScanEagles manufactured by Boeing subsidiary Insitu and one Procerus Unicorn from The Johns Hopkins University Applied Physics Laboratory (JHU/APL). The UAVs communicated using a Mobile Ad Hoc Network developed by Boeing Phantom Works and swarm technology developed by JHU/APL.

Swarm technology is similar to how insects communicate and perform tasks as an intelligent group. The UAVs worked together to search the test area through self-generating waypoints and terrain mapping, while simultaneously sending information to teams on the ground. A broader demonstration is planned for the end of September.

"This is a milestone in UAV flight," says Gabriel Santander, Boeing Advanced Autonomous Networks program director and team leader. "The test team proved that these unmanned aircraft can collect and use data while communicating with each other to support a unified mission. This swarm technology may one day be used for search-and-rescue missions or identifying enemy threats ahead of ground patrols."

"The decentralized autonomous vehicles we demonstrated show the potential for improved response time and reduced manning requirements when compared with current systems," says Dave Scheidt, JHU/APL principal investigator. "We are excited we were able to demonstrate this capability on deployed vehicles such as the Boeing ScanEagles."

The ScanEagle system also recently took part in the successful test of a Boeing-developed narrowband communications relay that was used to link handheld radios in the mountains of California.

The swarm technology demonstrations are being conducted under a collaborative agreement between Boeing and JHU/APL, which is a University Affiliated Research Center and a division of Johns Hopkins University that has for nearly 70 years been addressing critical national challenges through the innovative application of science and technology. It maintains a staff of about 5,000 on its Laurel, Md., campus.